Cisco 3.3 - Manual (Page 146)

Chapter 4 Network Configuration
Network Device Group Configuration
4-30
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
Tip If the Network Device Groups table does not appear, click Interface
Configuration, click Advanced Options, and then select Network
Device Groups.
Step 3 In the Network Device Group Name box, type the name of the new NDG.
Tip The maximum name length is 24 characters. Quotation marks (“) and
commas (,) are not allowed. Spaces are allowed.
Step 4 Click Submit.
The Network Device Groups table displays the new NDG.
Step 5 To populate the newly established NDG with AAA clients or AAA servers,
perform one or more of the following procedures, as applicable:
• Adding a AAA Client, page 4-16
• Adding a AAA Server, page 4-24
• Assigning an Unassigned AAA Client or AAA Server to an NDG, page 4-30
• Reassigning a AAA Client or AAA Server to an NDG, page 4-31
Assigning an Unassigned AAA Client or AAA Server to an NDG
You use this procedure to assign an unassigned AAA client or AAA server to an
NDG. Before you begin this procedure, you should have already configured the
client or server and it should appear in the Not Assigned AAA Clients or Not
Assigned AAA Servers table.
To assign a network device to an NDG, follow these steps:
Step 1 In the navigation bar, click Network Configuration.
The Network Configuration page opens.
Step 2 In the Network Device Groups table, click Not Assigned.