Cisco 3.3 - Manual (Page 177)

5-23
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
Chapter 5 Shared Profile Components
Network Access Restrictions
Editing a Shared Network Access Restriction
To edit a shared NAR, follow these steps:
Step 1 In the navigation bar, click Shared Profile Components.
The Shared Profile Components page appears.
Step 2 Click Network Access Restrictions.
The Network Access Restrictions table appears.
Step 3 In the Name column, click the shared NAR you want to edit.
The Network Access Restriction page appears with information displayed for the
selected NAR.
Step 4 Edit the Name or Description of the NAR, as applicable.
Step 5 To edit a line item in the IP-based access restrictions table, follow these steps:
a. Double-click the line item that you want to edit.
Information for the line item is removed from the table and written to the
boxes below the table.
b. Edit the information, as necessary.
Note The total number of characters in the AAA Client list and the Port and
Src IP Address boxes must not exceed 1024. Although Cisco Secure
ACS is capable of accepting more than 1024 characters when you add
a NAR, you cannot edit such a NAR and Cisco Secure ACS cannot
accurately apply it to users.
c. Click enter.
The edited information for this line item is written to the IP-based access
restrictions table.
Step 6 To remove a line item from the IP-based access restrictions table, follow these
steps:
a. Select the line item.
b. Below the table, click remove.
The line item is removed from the IP-based access restrictions table.