Sony STR- D915 - Manual (Page 24)

Sound Field Settings (Continued)
Adjusting the Sound Field Programs
Adjusting the tone control
4 1 2 3
1
Press SOUND FIELD ON/OFF to ON.
The last selected sound field indicator lights.
2
Press SOUND FIELD MODE repeatedly until
the desired SOUND FIELD program is
displayed.
Press < or > to select BASS or TREBLE.
5
Press A or V to adjust the level.
3
Press DPC MODE repeatedly until the TONE
indicator lights.
To cancel the tone effect
Press TONE ON/DEFEAT on the front panel or EQ/TONE
ON/OFF on the remote commander. The sound processed
only with the surround settings is heard.
24
Adjusting the surround sound parameters
•mm
5 1 2 3 4
1
Press SOUND FIELD ON/OFF to ON.
The last selected sound field indicator lights.
2
Press SOUND FIELD MODE repeatedly until
the desired SOUND FIELD program is
displayed.
If you select DOLBY SUR or THEATER on step
2.
press CENTER MODE to select PHANTOM,
3CH LOGIC NORMAL or WIDE.
4
Press DPC MODE repeatedly until the SUR
(surround) indicator lights.
5
Press
A
or
V
to select the desired
parameter (delay time, rear or center level).
6
Press < or > to adjust the level of the
parameter.
After setting the surround program, the setting is
stored automatically.
When you store a new sound field effect
The previous sound field effect is erased and the new one
will be replaced.
Even if AC power cord is disconnected
The stored data is maintained for approximately 1 month.
When selecting ACOUSTIC
ACOUSTIC does not have the surround effect and only the
tone effect can be available. So when selecting ACOUSTIC,
only the tone setting can be adjusted.
Note
Only one sound field program will be stored in a function.
Each time you select the function, the sound field program
previously stored in the function will be called up.