Valve controls - all systems – Environmental Water Systems CWL CHLORAMINE 1865 User Manual
Page 3
3
SCHEMATIC: ALL SYSTEMS - Valve, Bypass, Adaptors and Valve Controls
BYPASSED
IN SERVICE
Supplied Bypass Valve - All Systems
Top View
Outlet Valve
Closed
Outlet Valve
Open
Inlet Valve
Closed
Inlet Valve
Open
INLET
Incoming
Water
Supply
OUTLET
Filtered
Water to
Home
INLET
Incoming
Water
Supply
OUTLET
NOTE:
Inlet
and
Outlet
Valves
are
closed
and
in
the
bypass
position
when
the
holes
appear
at
the
top
and
bottom
as
shown
to the right
No Flow Into System
Flow Into System
to be Filtered
Flow of Filtered
Water from System
NOTE:
Inlet
and
Outlet
Valves
are
open
and
in
the
service
posi
-
tion
when
the
holes
appear
at
the
sides
(or
do
not
appear
on
top)
as shown to the left
Valve Controls - All Systems
What is normally seen on the display:
Current Time of Day in Data Display
PM Indicator (if applicable)
Data Display will alternate (every 10
seconds) between Time of Day to another
number and then back to the Time of Day
- this is normal and tells the user the next
time the system will backwash counting
down each day from 6 (factory pre-set) until
backwash
In Service Icon
During Installation when instructed:
Use the Up and/or Down Button to set
the Time of Day
Use the Extra Cycle Button to flush the
system. The Parameter Display will appear
and indicate the cycle engaged (“BW” or
“RR”) during backwashing and the Data
Display will indicate time remaining during
a cycle
Contact EWS Customer Service if you see
an Error Icon or have wandered into a Pro-
gramming Mode that you do not understand.
valve
controls
1” MNPT
drain fitting with
grey clip
7’ electric cord &
24v transformer
(not shown)
model number
and labeling
NOTE: a total of seven (7) red connection clips are used
**
A (1) - clip, top cap assembly, B (2) - clips, valve to bypass, C (2) - clips, bypass to adaptors, D (2) - clips, bypass assembly
C
bypass to adaptors
clip connections
B
valve to bypass
clip connections
A
B
C
C
B
D
D
valve body
built-in bypass
1”, 1 1/4” & 1 1/2”
MNPT adaptors provided
ALL SYSTEMS: Illustration of Complete Valve Assembly, Bypass and Provided Adaptors: 18” Overall Length Front to Back
3”
on center
**WARNING:
Removal of any red clip while unit is under pressure will result in water damage and damage to valve. See other cautions within this manual.
removable
valve
cover
Parameter
Display
Data
Display
PM
Indicator
In Service
Icon
Error
Information
Icon
Programming Icon
Extra Cycle
Button
Up
Button
Down
Button