Mercedes-Benz S-Class 2012 - Manual (Page 298)

Setting the rear-compartment airflow
using the front control panel
X Turn the SmartKey to position 2 in the
ignition lock.
X Activate the Y rear compartment
function via COMAND (
Y page 268).
The rear-compartment climate control can
be controlled via the front control panel
using the Y rear compartment function.
X To increase/reduce: press the K
rocker switch up or down.
Setting the rear-compartment airflow
using the rear control panel
X Turn the SmartKey to position 2 in the
ignition lock.
X To increase/reduce: press rocker switch
J up or down (
Y page 291).
Defrosting the windshield
You can use this function to defrost the
windshield or to defrost the inside of the
windshield and the side windows.
i You should only select the defrosting
function until the windshield is clear again.
X Turn the SmartKey to position 2 in the
ignition lock.
X To switch on: press the ¬ rocker
switch up or down.
The indicator lamp in the ¬ rocker
switch lights up.
The climate control system switches to the
following functions:
R cooling with air dehumidification on
R high airflow 17
R high temperature 17
R
air distribution to the windshield and
front side windows
R air-recirculation mode off
X To deactivate: press the ¬ rocker
switch up or down.
The indicator lamp in the ¬ rocker
switch goes out. The previously selected
settings come into effect again. The cooling
with air dehumidification function remains
on. Air-recirculation mode remains
deactivated.
or
X Press the w rocker switch up or down.
or
X Press the K rocker switch up or down.
MAX COOL maximum cooling
The MAX COOL function is only available in
vehicles for the USA.
MAX COOL is only operational when the
engine is running.
The MAX COOL function is activated
automatically:
R
if climate control is set to automatic
(Ã) on both sides
R if additional cooling is used
The display shows MAX COOL .
This is the quickest way to cool the vehicle
interior when the sliding sunroof and the side
windows are closed.
Defrosting the windows
Windows fogged up on the inside
X Activate the cooling with air
dehumidification function via COMAND
(
Y page 267).
X Activate automatic mode Ã.
X If the windows continue to fog up, activate
the defrosting function (
Y page 296).
i You should only select this setting until
the windshield is clear again.
17 Depending on the outside temperature.
296
Operating the climate control system
Climate control