Mercedes-Benz S-Class 2012 - Manual (Page 387)

X Press a.
The current selection is displayed.
X To activate/deactivate: press a
again.
When ATTENTION ASSIST ( Y page 356) is
activated, the À symbol appears in the
multifunction display when the ignition is on.
Activating/deactivating Blind Spot
Assist
You can use the Blind Spot Assist
function to activate or deactivate Blind Spot
Assist (
Y page 360) or Active Blind Spot
Assist ( Y page 364).
X Press = or ; on the steering wheel
to select the
DriveAssist menu.
X Press 9 or : to select Blind Spot
Assist .
X Press a.
The current selection is displayed.
X To activate/deactivate: press a
again.
Activating/deactivating Lane Keeping
Assist
You can use the Lane Keeping Assist
function to activate/deactivate Lane Keeping
Assist (
Y page 362) or Active Lane Keeping
Assist ( Y page 367).
X Press the = or ; button on the
steering wheel to select the
DriveAssist
menu.
X Press the 9 or : button to select
Lane Keeping Assist .
X Press a.
The current selection is displayed.
X To activate/deactivate: press a
again.
If Lane Keeping Assist or Active Lane keeping
Assist is activated, the multifunction display
shows the à symbol when the ignition is
switched on.
Service menu
In the Service menu you can:
R
call up display messages ( Y page 388)
R
check the tire pressure electronically
(
Y page 497)
R call up the service due date ( Y page 462)
R check the oil level ( Y page 457)
Settings menu
Introduction
The Settings menu can be used for:
R
switching the daytime running lamps on/
off
R switching Adaptive Highbeam Assist on/
off
R
showing or hiding the additional
speedometer
R selecting the units for speed and distance
R switching the belt adjustment on/off
R
activating/deactivating the radar sensor
system
Switching the daytime running lamps
on/off
This function is not available in Canada.
If you have activated the
Daytime Running
Light function and the light switch is in the
$ or c position, the daytime running
lamps are switched on automatically when
the engine is running.
In the dark, the following also light up:
R
the parking lamps
R
the tail lamps
R
the license plate lamp
R
the side marker lamps
If you turn the light switch to a different
position, the corresponding lights are
switched on. If you switch off the daytime
running lamps at night, make sure that the
light switch is set to L or c.
The factory setting is
On .
Menus and submenus
385
On-board computer and displays
Z