At a glanc e, Basic functions of comand – Mercedes-Benz GL-Class 2012 COMAND Manual User Manual
Page 31
necessary to set the audio format
(
Y
page 135).
i
The
Logic7
®
On
function creates a
surround sound experience for every
passenger when playing, for example,
stereo recordings. It enables optimum
playback of music and films on CD, audio
DVD or video DVD with multichannel audio
formats, such as MLP, dts or Dolby Digital.
This results in sound characteristics like
those intended by the sound engineer
when the original was recorded.
i
If you select
Logic7
®
Off
, all permissible
formats are played as stored on the
medium. Due to the design of the
passenger compartment, an optimum
audio experience cannot be guaranteed for
all passengers.
i
Discs which support the audio formats
mentioned have the following logos:
Dolby Digital
dts
MLP
Switching surround sound on/off
Example: switching on surround sound for
radio mode
X
Press the $ function button.
The radio display appears. You will hear the
last station played on the last waveband.
X
Select
Sound
using the :=;
buttons and press the 9 button to confirm.
X
Select
3D sound
and press the 9 button
to confirm.
X
Select
Logic7
®
on
or
Logic7
®
off
using
the 9: buttons and press the 9
button to confirm.
Depending on your selection, surround
sound is switched on or off and the menu
is exited.
X
To exit a menu without storing: press the
% back button or the = button.
i
Please bear the following in mind:
For the optimum audio experience for all
passengers when LOGIC7
®
is switched on,
the balance and fader settings should be
set to the center of the passenger
compartment.
You will achieve the best sound results by
playing high-quality audio and video DVDs.
MP3 tracks should have a bit rate of at least
128 kbit/s.
If radio reception is poor, e.g. in a tunnel,
you should switch off Logic 7
®
, as it may
otherwise switch between stereo and
Basic functions of COMAND
29
At
a
glanc
e
Z