Mercedes-Benz C-Coupe 2012 COMAND Manual - Manual (Page 123)

X To reject: select Reject by turning cVd
the COMAND controller and press W to
confirm.
or
X Press the ~ button on COMAND or on
the multifunction steering wheel.
X To accept: confirm Accept by pressing
W.
or
X
Press the 6 button on COMAND or on
the multifunction steering wheel.
Multifunction display (example)
i You can also accept the call by voice
command using the Voice Control System
(see the separate operating instructions).
Once you have accepted the call, you can use
hands-free mode. The call volume can be
adjusted (
Y
page 34). For more information,
see the "Functions during a single call
connection" section (
Y
page 122).
The display shows the phone number or the
name and phone number (if the entry is stored
in the address book) or shows the Unknown
(phone number withheld) message.
i You can also accept a call as described
above when another main function is
switched on in COMAND. Once you have
accepted the call, the display switches to
telephone mode. After the call is finished,
you see the display of the previous main
application again.
The display does not switch to telephone
mode if you:
R hide the window with the % button
next to the COMAND controller and then
R accept the call with the ; button on
the multifunction steering wheel
Making a call
Entering a telephone number using the
number keypad
X
Call up the telephone basic menu
(
Y
page 119).
X Enter the digits using the number keypad.
X To connect a call: press the 6 button
on COMAND or on the multifunction
steering wheel.
Entering a telephone number using the
telephone basic menu
X Call up the telephone basic menu
(
Y
page 119).
X Select the digits one by one by turning
cVd and sliding ZVÆ the COMAND
controller and press W to confirm.
X
To connect a call: select ° in the
character bar and press W to confirm.
or
X Press the 6 button on COMAND or on
the multifunction steering wheel.
Telephone operation
121
Tel
eph
on
e
Z