Mercedes-Benz CLK-Class 2008 Owners Manual - Manual (Page 154)

153
Controls in detail
Control system
Selecting CD MP3-track (vehicles with
COMAND* and/or CD changer*)
̈ Turn on the radio and select the CD
changer* (
୴ page 233) or turn on
COMAND* and select CD or
CD changer*. Vehicles with
COMAND*: Refer to separate
operating instructions.
̈ Press button è or ÿ repeatedly
until the settings for the CD currently
being played appear in the multifunc-
tion display.
1 MP3 mode (vehicles with COMAND*)
2 Current track
̈ Press button k or j repeatedly
until the desired track is selected.
For more information on MP3, see “MP3
notes” (
୴ page 230), and for operating,
see “MP3 playback” ( ୴ page 231)
Navi* menu
The Navi menu contains the functions
needed to operate your navigation system.
̈ Press button è or ÿ repeatedly
until the message Navi appears in the
multifunction display.
ț If COMAND* is switched off, the mes-
sage
Navi off appears in the multi-
function display.
ț With COMAND* switched on but route
guidance not activated, the direction of
travel and, if available, the name of the
street currently traveled on appear in
the multifunction display.
ț With COMAND* switched on and route
guidance activated, the direction of
travel and maneuver instructions ap-
pear in the multifunction display.
Please refer to the COMAND* manual for
instructions on how to activate the route
guidance system*.
i
A CD with MP3 files insert in the
CD changer* is handled by the
audio/COMAND* system like an audio CD. In-
formation contained on the CD with MP3 files
will not shown in the multifunction display or in
the audio/COMAND* display.
i Level of information displayed will vary de-
pending on the information contained on the CD
with MP3 files insert in the single CD player of
the COMAND* system.
To select a CD from the CD changer* magazine,
press a number on the audio system or the
COMAND* system key pad located in the center
console.