Mercedes-Benz CL-Class 2007 - Manual (Page 63)

62
Safety and Security
Occupant safety
̈ Fold upholstery cover 3 upward.
̈ Turn installation device 4 to a vertical
position so that upholstery cover 3
does not fold down.
̈ Install child seat according to the
manufacturer’s instructions.
A rigid connection is established be-
tween the child seat and the body of
the vehicle.
Blocking of rear side window operation
You can block the rear side window opera-
tion (for instance when you have children
riding in the rear passenger compartment).
The override switch is located on the door
control panel of the driver’s door.
1 Override switch
2 Indicator lamp
̈ Activating: Press switch 1.
Indicator lamp 2 comes on. The rear
side windows can no longer be operat-
ed using the respective switch located
in the rear trim panels.
̈ Deactivating: Press switch 1 again.
Indicator lamp 2 goes out. The rear
side windows can be operated using
the respective switch located in the
rear trim panels.
i
The child seat must be firmly attached to the
right and left side anchor fittings.
Non-LATCH type child seats may also be used
and can be installed using the vehicle’s seat belt
system. Install child seat according to the
manufacturer’s instructions.
Warning!
G
Activate the override switch when children
are riding in the back seats of the vehicle.
The children may otherwise injure them-
selves, e.g. by becoming trapped in the win-
dow opening.
When leaving the vehicle, always remove the
SmartKey or SmartKey with KEYLESS-GO*
from the starter switch, take it with you, and
lock the vehicle. Do not leave children unat-
tended in the vehicle, or with access to an
unlocked vehicle. A child’s unsupervised ac-
cess to a vehicle could result in an accident
and/or serious personal injury.
i Operation of the rear side windows with the
switches located in the driver’s door is still pos-
sible.
୴୴