Smart Power Systems HR-12 50 Hz - Manual (Page 53)

Smart Power
®
Systems
A. C. MODULAR GENERATOR SYSTEM
Page 52 of 54
Step a: Hold Mode until
Amps Line 1 Blinks
88.
Release switch so 0Pt
appears.
Step b: Press mode twice
to make PSEt appear.
Step c: After selecting
PSEt, Press On/Off until
n appears.
Disabling pump set option
Figure 31
a. Press and hold the Mode switch until the Amps Line 1 field blinks with 88 (more
than 10 seconds). Release the switch while the Amps Line 1 field is blinking to
make
0Pt appear. Reference Figure 31.
b. Press the Mode switch until PSEt appears.
c. Press the On/Off switch until an n appears, indicating Pump Set option is
inactive.
d. Put system into Normal mode by pressing the Mode switch.