Vintage Cellars Transtherm Double Castel Glass Door Black - Manual (Page 7)

P 7
GB
Presentation Kit
Designed for both storage and bottle presentation, this kit is made up of:
- 1 universal rack (13 recesses),
- 1⁄2 rack (6 recesses)
To arrange the bottles on a presentation kit, continue as follows:
- be sure the shelves do not touch the rear wall.
On the 1⁄2 rack:
- start by arranging the bottles in each recess, bottom of bottle towards the
back (6 traditional Bordeaux bottles)
- continue the arrangement by piling the bottles (5+6+5 = 16 traditional
Bordeaux bottles) making sure that the base of the bottles does not touch the
back wall.
Maximum load on half rack: 22 traditional Bordeaux bottles
On the sliding shelf:
- start by arranging the bottles in each recess, bottom of bottle towards the
back (6 traditional Bordeaux bottles)
- to present your bottles, arrange them upright on the front of your rack.
Maximum load on a universal shelf: 13 traditional Bordeaux bottles
The presentation kit has a maximum capacity of 35 traditional Bordeaux bot-
tles
Generally speaking, never slide a rack that has several bottles piled on it,
or when it has vertically presented bottles on it.
You should remember that if you do not have enough bottles to fill your wine
cabinet, it is better to distribute the load over all of the shelves available, so as
to avoid "all on top" or "all below" type loads.
The shelves all have a label slot, designed to receive the pre-cut cards delive-
red with your cabinet, thus helping you to identify the position of your favou-
rite wines at a glance.
Never slide the sliding shelf or the half rack when they are being used as a
presentation kit. All of the bottles could fall.
ecommendation
important
omment
ecommendation
important
omment
Never alter the position of your cabinet’s rigidity bar (see page 3, N° 14),
NEVER move this part while the cabinet is loaded.
ecommendation
important
omment
ecommendation
important
omment