Cleaning – Welch Allyn LS200 Procedure Light - User Manual User Manual
Page 24
18
Chapter 3 Maintenance
Welch Allyn LS200 Procedure Light
Cleaning
Turn power switch to the OFF position and unplug the power
cord from the electrical outlet prior to cleaning.
You can wipe the entire unit down using a cloth dampened
slightly with a mild solution of detergent and water or glass
cleaner. Do not to allow the plug prongs to get wet. Wipe the unit
dry with a clean, dry cloth.
DO NOT plug the LS200 Procedure Light into the electrical outlet
until the unit is thoroughly dry.
Caution Cleaning and disinfection should comply with
local authorities responsible for hygiene and disinfection.
Caution Do not to allow solution to drip into luminaire.
Caution DO NOT spray solution directly into joints.
Caution DO NOT sterilize any part of the unit.
Caution DO NOT immerse any part of the unit in
cleaning solutions.