Welch Allyn Image Capture System - User Manual - Manual (Page 18)

10 Chapter 2 Equipment Setup Welch Allyn Image Capture System
Review Draft Company Confidential Aug 24, 2004
Figure 7. Take No Action dialog box
Installing the Welch Allyn Image Capture System Software
Verify that your computer meets the minimum system requirements before installing the
Welch Allyn Image Capture System software. See “Minimum System Requirements"
on
page 1 if you have any questions about the specifications. If your computer does not
meet the minimum system requirements, the software will not work reliably and you will
experience problems such as no video image.
1. Load the Welch Allyn Image Capture System CD into the computer. The CD’s autoplay
feature will automatically launch the installation program. Click OK to continue the
installation.
If the installation program does NOT start, perform the following steps to manually
invoke it.
a. Click Start > Run from the task bar.
b. Use the drive letter of the CD-ROM drive, assuming it is D:, type D:\Setup.exe
and click OK. This will launch the Image Capture System installation program.
c. To perform the installation, click OK. The Please wait... dialog appears. This step
of the procedure will take a few minutes. If the .NET Framework (1.1) is not
installed, it is installed at this time and will take several minutes for the process to
complete.
d. Click Next at the Welcome screen and at the License Agreement screen, click I
Agree > Next.
e. Accept the default location at the Select Installation Folder screen. Change the
installation folder only if necessary.
f. Select the appropriate Windows account and click Next to continue the
installation.
Note A Windows account means that different users can login on the same computer
(at different times) and the computer will reboot with that user’s preferences.