Compex Technologies NetPassage 18A - Manual (Page 80)

71
Follow these steps to setup PPPoE.
PPPoE Configuration
Select PPP over Ethernet from the Select WAN
Type menu.
At the PPPoE WAN Setup page:
1. Enter your broadband Internet account
parameters in the relevant fields.
2. The Status section displays your
connection settings such as:
IP Address
Network Mask
Gateway IP Address
Primary & Secondary DNS
3. If you are online, clicking Disconnect will
disconnect your connection.
4. Click Apply .
5. Click
Reboot System button to restart the
system and allow the WAN type
changes to take effect.
To use Email Notification, please refer to
Chapter 8: Router Setup – Broadband Internet
Through the router – WAN Setup Email
Notification
2
1