Outdoor Great Room GE-94 - Manual (Page 6)

6
90236 GE50-94 REV A 8-3-12
6. Hang the fireplace on the hooks at top and push the fireplace into the bracket and then insert the short M5×10 screws
into the bottom support tabs. (Fig. 6)
7. Arrange the white & clear faux stones along the inset window ledge at the front of the firebox.
8. Install the fireplace front as pictured. (Fig. 7) Secure the fireplace front with 2 M4×8 screws in the tabs on top of the fire
box
9. Connect the backlighting cable at the bottom of the glass to that of the fire box (Fig. 8, Fig.9,)
1
2
2
1
Fig. 6 Fig. 7
Insert M5x10 screws
F
i
r
e
p
l
a
c
e
On underside of fire box, remove the
screws holding access panel on. Pull long
cord out and thread through hole in access
panel. Replace access panel when finished.
Connect cord to front LED lighting plug
and tuck cords behind glass.
Fig. 8 Fig. 9