PDR Mounts SPM100 - Manual

M odel
Thank you for purchasing the PDR product
To ensure the correct usage, please read and follow the instructions manual thoroughly. Please store the instructions in a safe place for future reference.
To ensure customer safety, be sure to decide the installation location so that the strength is sufficient to withstand the weight of both the panel
displays and the mount.
Always use at least two persons for all installations.
Fully tighten all of the mounting screws as specified in the installation instructions.
MODEL SPM-100 Features
Special techniques are necessary for installation of the panel display mount.
Do not attempt to perform this work by yourself.
Request an installation specialist to install this unit.
Manufacturer assumes absolutely no responsibility for injuries and damages that may occur due to improper installation and handling.
1
Mounts by
A division of David Engineering & Mfg. Inc.
SINGLE POLE MOUNT SPM-100
All PDR mounts and adapters carry a limited lifetime warranty from ship date against defects in material and workmanship.
Check the PDR website for details @
www.PDRmounts.com. We are not liable for improper installation that results in damage
to mounts, adapters or presentation equipment.
? Suitable for Vesa 100mm and 75mm or any PDR mount
? Mounts to standard 1 ½” pipe (not supplied)
? Display Mount hardware included
? Rotates 360 degrees
? Tilts down 30 degrees
? 500 lb load capacity
? Heavy metal construction
? Made in the USA