Warpia SWP120A Installation Manual & Troubleshooting Guide - Manual (Page 20)

StreamHD Installation Guide
20
Icon Color Status
Wireless USB Channel is Busy (green icon with
exclamation)
Low channel quality detected, but at least one Wireless
USB device is still connected. To improve connection
quality, see
Channel busy.
Wireless USB Channel is not available (red icon with
exclamation)
No available channel detected. To improve connection
quality, see
Channel busy .
Host Hardware Disabled (gray icon with X)
Wireless USB PC Adapter is disabled.
Note: Under the Japan regional setting, this icon is
displayed whenever the AC power source is disconnected
from the PC.
LED indication
The following LED indications allow you to see the operational status of the
Wireless USB Adapters.
P ower:
· OFF when no power is applied or adapter is not connected to a USB port.
· On when power is applied and wireless connection between the PC Adapter
and the Device Adapter is not established.
Traffic:
· Rapid flashing when data is received or transmitted.
Wireless USB Adapter
Power/Traffic LED