BendixKing FPI 3501B System FPD 500 - Manual (Page 23)

FPD 500 FLAT PANEL DISPLAY SYSTEM
3.2.1.7 Distance Display
Two white alphanumeric distance displays provide the distance in
nautical miles from the aircraft to the selected DME or VORTAC sta-
tion in the standard navigation mode
(DME), or distance to a waypoint in the
INS mode. The distance source is annun-
ciated above its respective distance
value. If distance data is invalid, the dis-
tance value is replaced by dashes. When
distance data is missing, the entire dis-
ance display is removed. DME distance
is shown as XXX.X from 0.0 thru 399.9
NM. INS/LNAV distance is shown as
XXX.X from 0.0 thru 999.9 and as XXXX
for 1000 NM and above.
3.2.1.8 To/From Display
An orange arrowhead near the center of
the azimuth card pointing towards the
head of the course pointer represents the
“TO” indication, pointing towards the tail
of the course pointer represents the
“FROM” indication. The arrowhead points
toward the navigation station or waypoint,
indicating whether the current selected
course is TO or FROM the navigation
station or waypoint.
3.2.1.9 Glideslope Display
A white stationary dotted vertical scale located
on the right side of the indicator is the refer-
ence for the glideslope deviation pointer (white
triangle). The glideslope pointer indicates the
center of the glideslope with respect to the
actual aircraft position.
3.2.1.10 Drift Angle Display
Not currently implemented.
3.2.1.11 Ground Speed Display
Not currently implemented.
EADI/EHSI Displays
3-13
Rev. 0
Jan/97
A
000
TRU
INS1
1234
INS2
1324
Figure 3.2-6
Distance Display
000
TRU
INS1
----
INS2
----
Figure 3.2-7
Invalid Distance Display
0
33
30
7
6
3 G
Figure 3.2-8
“TO” Display
2
24
21
15
12
18
Figure 3.2-9
“FROM” Display
M
R
GS
Figure 3.2-10
Glideslope Indicator