Brookfield DV2T Viscometer - Manual (Page 49)

Brookfield Engineering Labs., Inc. Page 49 Manual No. M13-167-B0614
TIP: The selection of speed can be restricted by User Log In. Use this
restriction combined with a saved test configuration to ensure that
the correct speed is always used for critical tests. See Section IV.4.2
for details of Users and Access.
IV.4 Admin Functions
The Admin Functions menu includes settings related to access and basic instrument
management of the DV2T. The Admin Functions menu is only available to the Administrator
when Log In is required. Users and Power Users do not have access rights to the Admin
Functions. Nine settings are available including:
Log In and Lock Out
- Require User ID and Password. Define Lock Out parameters.
Users and Access
- Define User ID, Password, User capabilities. Add User.
Set Time and Date - Set the time and date.
Backup and Import
- Update Instrument Firmware, add Language file, Back Up
data and settings.
Default Path - Define the logic for the Default Path for saving data and tests.
Settings Reset - Reset basic settings to DV2T factory default.
Device Reset - Reset the entire DV2T to factory default.
Calibration Reminder - Establish use and frequency of calibration reminder.
Save Audit Trail - Export the Audit trail to assist Brookfield when troubleshooting
DV2T operation.
IV.4.1 Log In and Lock Out
The Log In and Lock Out menu allows the user to define the Log In requirement and toggle
the Lock Out feature within Running Viscosity Test (see Figure IV-9).
Figure IV-9