Brookfield DV2T Viscometer - Manual (Page 87)

Brookfield Engineering Labs., Inc. Page 87 Manual No. M13-167-B0614
Appendix K - Screen Protector
The Brookfield DV2T Viscometer is provided with a screen protector that can be applied to
the touch screen surface. This screen protector is designed for prolonged use. Brookfield
recommends replacing the screen protector within 1 year of application. The screen
protector is provided in a kit (part number GV-1019) that includes the following items:
• Two screen protectors (with mounted applicator and tabs)
• One screen cloth (part number GV-1045)
• One soft card
• Instructions printed on the package
Retain the soft card and screen cloth with any unused screen protector.
Install the Screen Protector
Installation instructions for the screen protector are available in three methods:
1.
Read printed instructions on the package
2.
View the instructional video on the Brookfield YouTube Channel:
www.youtube.com/user/BrookfieldEng
3.
Read the expanded printed instructions in this appendix (see below).
A failure to properly install the screen protector may result in a disabled
touch screen.
Step 1:
• Turn off the DV2T viscometer (power down) prior to installation.
• Clean the DV2T touch screen with the screen cloth prior to
installation. Any debris, dust, or oil on the touch screen may
prevent proper adhesion of the screen protector.
• Identify Tab 1 and Tab 2 prior to removing any protective
layer. Peel back adhesive Tab 1, from the bottom, to expose
half of the protector (see Figure K-1).
• Do not touch the exposed surface of the adhesive side of
the screen protector.
Step 2:
• Alignment of the screen protector to the bezel (frame) of the
DV2T is critical. Be sure to avoid mis-alignment which may
result in the screen protector contacting or locating under
the bezel (frame). A foam alignment tool is attached to the
screen protector’s outer layer and should be used to locate
the screen protector to the lower right hand corner of the
touch screen (see Figure K-2).
Failure to properly align (install) the screen protector could result in a
failure of the touch screen.
Figure K-1
Figure K-2