Brookfield RST Rheometer - Manual (Page 29)

Brookfield Engineering Labs., Inc. page 29 Manual No. M14-223
has been turned on. If you see the following MEAS SYS SN:0 the explanation is that either the spindle
with bar code was not recognized or the spindle does not have a bar code.
Push OK to go to the next screen which gives the summary of test parameters.
Push OK to go to the next screen which shows three icons: MATH, QC, REPORT
Push OK to go to the next screen which shows test information for the first measuring point in the
completed test. Use the RIGHT ARROW to go forward from the first measuring point to the second
measuring point. Continue using the RIGHT ARROW to review all the measuring points in the test file or
the LEFT ARROW if you need to go backwards in the test.
The icons at the bottom provide choices for TABLE and GRAPH.
Click on TABLE to review the test measuring points in tabular format. The UP and DOWN arrows allow
you to review all of the measuring points in the test.
Click on GRAPH to review the graphical data for the completed test. The Y1-axis is the viscosity data, the
Y-2 axis is the temperature data and the X-axis is time. It is not possible to change the identities for each
axis.
Click on MATH to review maximum average and minimum viscosity values for the completed test.
III.2 Languages
User screens for the RST Rheometer are available in the following languages; click on SETTINGS on the
home screen (main menu), then click on LANGUAGE:
• German
• English
• Chinese
In future versions, the following languages will be implemented:
• Japanese
• French
• Polish
• Portuguese
• Russian
• Spanish
Figure III-15