KEYENCE LK-HD1001 - Manual (Page 13)

1-7
1
1 Before Use
Mounting the Touch Panel
Mount the touch panel using the supplied mounting brackets.
Mounting Precautions
Mounting direction/angle
Mount the touch panel so that the right and left sides are level.
Panel thickness
1.6 to 4.0 mm
Panel cutout
Mounting bracket tightening torque
Tighten to 0.3 to 0.5 Nm.
Tightening improperly can cause the panel or case to deform, or damage to the mounting brackets.
Notes to fulfill the protective construction (IP65f) of the panel surface
• Be sure the seal is free from dirt and debris.
• Mount in the center of the cutout in the panel.
• Tighten the mounting brackets to the appropriate torque.
167.5
226.5 0
+1
+1
0
NOTE