Ameri-King AK-451-ELT - Manual (Page 107)

107
APPENDIX A
RETROFIT INSTRUCTIONS FROM AK-450 TO AK-451
Old Model No.: AK-450-(AF)(AP), ELT 121,5/243 MHz.
New Model No.: AK-451-(AF)(AP), ELT 406/121,5/243 MHz.
RETROFIT INSTRUCTIONS:
1. Swap the followings items: ELT with mounting tray; Antenna with Coaxial
Cable; Remote Switch Unit with Buzzer.
Note 1: All mounting holes and cut out holes are exactly the same.
Note 2: Wiring Harness, between ELT and Remote Switch Unit, is exactly the same
i.e. Do not change the wiring harness. It is OK to use the existing AK-450
wiring.
Note 3: Adding a new Buzzer to be mounted anywhere in the cockpit, i.e. Tie wrap
into the aircraft Wiring Harness, or Fasten onto or behind the instrument
Panel, or fasten on the Remote Switch Unit.
2. Register with NOAA (or IBRD) (or National) via on line, or mailing the
Registration Form using the provided pre-stamped envelop.