Avlink HDMI-E8 - Manual (Page 16)

Distribution Amplifier (DA)—User Manual
15
6.2 IR Pass-through Connection
The Distribution Amplifier (DA) provides an IR Receiver cable and IR Blaster cable
accessories for IR pass-through. IR Receiver cable can be connected to IR Rx port or IR
EXT on the rear panel. On the other hand, IR Blaster cable can be connected to IR Tx
port on the rear panel.
- Support you an IR channel to control the player from TV or control the TV from player.
- Support all kinds of IR frequency band
- IR pass-through switch is based on HDMI switched
Figure 6-6 IR Extended Aiming – Multimedia
) The Output - IR Tx/Rx are designed on the HDMI Extender (HX-RW). IR OUT is
specified for IR Tx, alternatively, IR1 IN and IR2 IN are specified for IR Rx. Refer to
Appendix E HDMI Extender (HX-RW).