Avlink HDMI-E8 - Manual (Page 52)

Distribution Amplifier (DA)—User Manual
51
) For 0: General selecting, you have to adjust the switcher ID on the real panel to “0”
that means the device with ID “0” will be upgraded.
4. For 1: Matrix Device will allow you to select target device based on ID 0 to 31 for
upgrading firmware.
5. Select “2: Matrix I/O Module” will allow you to upgrade I/O modules. You have to
decide which device you want to configure, and then select the suitable Device ID
and I/O Module from the drop-down menu. Click “Update” to upgrade.
) The Distribution Amplifier (DA) supports modules for upgrading; you have to
upgrade each module individually. You can select IO Module 5 for HDMI-E8 or IO
Module 9
for HDMI-E16 to upgrade all IO modules.