Cradlepoint MBR90 User Manual

Quick start guide, Setting up the router connecting your computer, Finding your password

Advertising
background image

CradlePoint_MBR90-xxx

WINDOWS 7

1) Click the NETWORK CONNECTION icon
in the lower right hand corner taskbar.
You’ll see a list of available wireless networks

2) Click CradlePoint_MBR90-xxx

3) Enter Default Password

4) Click CONNECT

MBR90

Wireless N Home Router

QUICK START GUIDE

1 )

What’s In The Box

SETTING UP THE ROUTER

CONNECTING YOUR COMPUTER

WINDOWS XP

WINDOWS VISTA

MAC OSX

1) Click START

2) Hover over CONNECT TO

3) Click WIRELESS NETWORK CONNECTION

You’ll see a list of available wireless networks

4) Click CradlePoint_MBR90-xxx

5) Enter Default Password

6) Click CONNECT

CradlePoint_MBR90-xxx

1) Click START

2) Hover over CONNECT TO

3) Click WIRELESS NETWORK CONNECTION

You’ll see a list of available wireless networks

4) Click CradlePoint_MBR90-xxx

5) Enter Default Password

6) Click CONNECT

1) Open your wireless connection list

by clicking the AIRPORT wireless
icon on your menu bar

You’ll see a list of available wireless

networks

2) Click on the CradlePoint_MBR90-xxx
3) Enter Default Password

12v Power Supply

Ethernet Cable

( Color May Vary )

Quick Start Guide

Plug the power supply into
an electrical outlet.

Connect the power supply to the
MBR90 and turn on “ ”.

Connect a modem: Cable, DSL,

Satellite, T1, T3, USB Wireless

Broadband Data Modem with

Active Subscription, or a supported

Smart Phone with Active Data +
Tethering Plan.

Ensure the WiFi switch is on “ |

POWER

CABLE/DSL

MODEM

( WAN )

CONNECT

COMPUTERS

or PRINTERS

( LAN )

WiFi

ON/OFF

RESET

Using Cable, DSL, or Satellite?

Connect the provided

Ethernet cable from your

Modem into the blue WAN port.

2 )

3 )

4 )

FINDING

YOUR

PASSWORD

ETHERNET CONNECTION

( PORT 1-4 )

INTERNET

CONNECTION

WiFi

BROADCAST

3G/4G

MODEM

POWER STATUS

2

3

4

Mounting Hardware

www.cradlepoint.com/mbr90

to receive support, you must register your product:

CradlePoint_MBR90-xxx

CradlePoint_MBR90-xxx

Made in Taiwan

Part number: MBR90

H/W ver.: V 1.0

F/W ver.: V 1.7.3

www.cradlepoint.com

RoHS

R06

12V 1A

FCC ID: SI5WRT383UV2

IC: 6921A-MBR900

WLAN MAC Address : 0030440cb825

Serial No.: MM100055505005

SSID:

CradlePoint_MBR90-825

MFG DATE: 02-SEP-10

WPS PIN: 25601299

Model: MBR900

Default Password: 440cb825

www.cradlepoint.com/mbr90

For additional information, visit:

170532-001

© 2010 CradlePoint, Inc. All rights reserved. CradlePoint is not responsible for omissions or errors in typography or photography. CradlePoint, WiPipe™,

and the WiPipe logo are trademarks of CradlePoint, Inc. in the US and other countries. Other trademarks are property of their respective owners.

NOTE: If you are asked for an “8-digit PIN”, see note on page 3.

CradlePoint_MBR90-xxx

CradlePoint_MBR90-xxx

After you connect your
modem to the router, you’re
now ready to connect to the
CradlePoint MBR90 WiFi.

802.11n antennas provide up
to 750 feet of range from the
CradlePoint router to your
connected computers or
WiFi-enabled devices.

Find your operating system
and follow the connection
steps.

Find your default password
on the bottom of your router.

NOTE: If you are asked for an

8-digit PIN”, click CONNECT

USING A SECURITY KEY and
enter your

eight character

default password.

ON/OFF

Your unique default password

is shown on the product label

on the bottom of your router.

It is the last eight characters

of your MAC Address.

You will be asked for this

password when you connect a

new device to the WiFi network

or log into the administration

pages.

The default password provides

WiFi security out-of-the-box.

3G/4G

MODEM SLOT

(USB)

WPS

SECURITY

find this label on the bottom of your router

MODEM

SIGNAL STRENGTH

|

Advertising