Cradlepoint INTEGRATED BROADBAND ROUTER IBR600 User Manual

Quick start guide, Finding your password special features, Using the first time setup wizard

Advertising
background image

IBR600 (Integrated Broadband Router)

QUICK START GUIDE

1 )

What’s In The Box

SETTING UP THE ROUTER

Plug the power supply into an electrical outlet.

Connect WiFi (2.4) and Modem ( )Antennas

Connect the power supply to the IBR600.
Ensure power is switched on. o = OFF | = ON

2 )

3 )

FINDING YOUR PASSWORD

SPECIAL FEATURES

2

3

4

for more information about your product, visit:

www.cradlepoint.com

www.cradlepoint.com/IBR600

To learn more about features, visit:

Your unique default password is shown on the product label on the bottom

of your router. It is also the last eight characters of the MAC Address.

You will be asked for this password when you log into the administration pages.

The default password provides security for your router out-of-the-box.

Default SSID: IBR600-xxx (last 3 characters of the MAC Address)

find this label on the bottom of your router

IPSec VPN End-Point Support
GRE Tunneling
Data Usage Management & Alerts
GPIO Interface
GPS

(if supported by modem carrier)

Failover / Failback
WiFi Hotspot Services

(Captive Portal/Walled Garden)

IP Passthrough
WiFi as WAN
Dual SSIDs
VLAN Support

USING THE FIRST TIME SETUP WIZARD

AC Power Supply

Quick Start Guide

PORTS & SWITCHES

Integrated Broadband Router

ETHERNET

DATA SOURCE

( WAN )

default

ETHERNET CONNECTIONS

POWER

12VDC

RESET

POWER

ON/OFF

POWER

LED

WiFI

LED

MODEM

LED

SIGNAL

STRENGTH

LEDS

MODEM

ANTENNA

CONNECTOR

MODEM

ANTENNA

CONNECTOR

WiFi

ANTENNA

CONNECTOR

WiFi

ANTENNA

CONNECTOR

MICRO

USB

WiFi ANTENNAS

(2.4)

MODEM ANTENNAS

( )

The First Time Setup Wizard will help you customize the name of your wireless network, change passwords
to something you choose, and establish an optimal WiFi security mode. The IBR600 comes with a unique
password creating built-in WiFi Security, which prevents unauthorized users from connecting to your WiFi network.

1)

Open a browser window and type “cp/” or “192.168.0.1” in the address bar. PRESS ENTER/RETURN.

2)

When prompted for your password, type the eight character Default Password found on product label

(the last eight characters of the MAC Address).

3) When you log-in for the first time, you will be automatically directed to the FIRST TIME SETUP WIZARD.

4) Follow the steps to establish a customized wireless network name, password, and security level.

If you are currently using the IBR600 WiFi network, you will need to reconnect your devices to the network
using the newly established wireless network name and wireless security password.

Model No.: IBR600

Part No.: IBR600

www.cradlepoint.com

H/W ver.: 1.0

MAC Address : 0030440c1fc1

Serial No.: MM100167900418

ESN (Hex): A1000010000557

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions (1) This device may not cause harmful interference and (2)This device must

accept any interference received, including interference that may cause undesired operation

Made in Taiwan

12V 1.5A

FCC ID:UXX-IBR600

RoHS

MFG DATE: MAR 2011

Default Password: 440c1fc1

Contains FCC ID: N7N-MC5728

dual-stream n

COMPUTERS

or LOCAL DEVICES

( LAN )

default

dual-stream n

Mounting Bracket

ACTIVATE YOUR MODEM

A wireless broadband data plan must be added to your IBR600. A new line of service can be added or
a data plan can be transferred from an existing account. Wireless broadband data plans are made
available from wireless carriers, such as Sprint and Verizon, and are required to allow your modem to
connect and transfer data on their network. You will need the ESN number from your product label on
your router to add or transfer a line of service. After adding a data plan to the modem, the modem may
need to be activated. To activate the modem, login to the IBR600 administration pages (see below) and
select Internet from the top navigation bar then Modem Settings from the drop-down menu, find and
select the CradlePoint modem and click Update/Activate, in the popup click Activate.

To add a broadband data plan, or to check if your modem has a broadband data plan attached, contact
the business you purchased the IBR600 from or your wireless service provider. For more information see
www.cradlepoint.com/IBR600.

Advertising