Howto remove and install the pullout drawer, Refrigerator installation – Kenmore TRIO 795.7757 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
REFRIGERATOR INSTALLATION
HOWTO REMOVE AND INSTALL THE
PULLOUT DRAWER
IMPORTANT: To avoid possible injury or product or
property damage, you will need two people to perform the
following instructions.
2. Installing Pullout Drawer
• With both hands, hold the center bar and push It out to
let both rails out to full extension simultaneously.
Make sure you have a right rail cover for each side.
Hook door supports (1 ) into rail tabs (2).
Lower door into final position and tighten the screws (3).
Align the top holes of the rail cover with the top holes of
the door supports to assemble the rail covers.
Assembly Hole
With the drawer pulled out to full extension, insert the
lower basket (4) in the rail assembly.
A WARNING: To prevent accidental child and pet
entrapment or suffocation risk. DO NOT allow them to
play inside of drawer.
A WARNING: DO NOT step or sit down on freezer door.
14