Brother INTELLIFAX 710M - Manual (Page 29)

allHliB:
IIB ::|r' ......
wlg^ts^mmlKm
IbLtPHONb bUNCTION SETTINGS
8. Press SET.
9. Select the type of number (FAX,
TEL, F/T, CHAIN) by using ^
(left arrow) or (right arrow) to
find the type you want.
(See For Your Information below.)
Example: FAX.
10. Press SET.
11. Return to step 4 to enter another
number, or press STOP to return to
date and time.
C
; T Y P E : F A X
^ & S E T T
( T Y P E : f a x "
9
fBsl-fciCT O N $ . - T o u c a ]
Helpful Hints If you have to wait for a dial tone when you get access to the outside line, you
should use REDIAL/PAUSE. When you press REDIAL/PAUSE, a dash
will appear on the display. By storing the nuujbers with a pause, you can create
a delay of 3.5 seconds.
FOR YOUR INFORMATION
Types of Numbers
When you store a number as a One-Touch or as a fipeed-nial mimher^ yon have a
choice of choosing the type of number. There are 4 options:
1. FAX (A fax number).
2. TEL (A telephone number).
3. F/T (Both a fax number and a telephone number).
4. CHAIN (A number, usually an access code, for chain dialing).
Chain Dialing
Sometimes you may want to choose from among several long-distance carriers when
you make a call. This is because rates may vary depending on the time and
destination. To take advantage of low rates, you can register the access code of a long­
distance carrier as a One-Touch or a Speed-Dial number for chain dialing. To do this,
you store the access code as you would a regular number and register it as a “chain”
number. (See step 9 on this page.) Then, when you want to make a call, you use this
number in combination with the regular number, which also may be a One-Touch or
a Speed-Dial number.
When more than one stored number is used to dial, the first number(s) must be called
type CHAIN, the last number in the sequence may be either type FAX, TEL or F/T.
This is also important for transmissions using credit cards.
If you want to store a phone/credit card number to be used in your dialing sequence,
you must store that phone/credit card number as a “chain” number. You can start
a chain dialing call by pressing a One-Touch key or Speed-Dial number where your
chain number is stored. Next you press another One-Touch or Speed-Dial number
for the regular phone number (either FAX, TEL or F/T number), or enter the number
manually. And then press
START to begin calling.
NOTE; When you send a fax using your credit card number in chain dialing, do NOT
send a cover page because your credit card number will be on it.
4-5