Brother MFC7000FC - Manual (Page 20)

C HA PT E R^f WO
Activity Report Interval
You can set the MFC to print activity reports at specific intervals (6,12,24 hours,
2,4, or 7 days). If you set the interval to OFF, you can print the report by following
the steps in the previous section.
Press [Functionl. (T), [ t ], [1]. The screen displays the current interval setting.
RCT.RPT.:OFF
;2 Press (T) or (3 to choose your setting. If you choose 7 days, the screen
prompts you to choose a day at which to begin the 7-day countdown.
% When the screen displays the setting you want, press ®.
H Enter the time to begin printing, in 24-hour format. (For example, enter
19:45 for 7:45 PM).
l5 Wait 2 seconds.
0 Press W to exit.
Transmission Verification (Xmit) Report
You can use the Xmit Report as proof that you sent a fax. This report lists the
name or fax number of the receiving party, the time and date of transmission,
and if the transmission was successful.
When the feature is OFF, the report is printed automatically only if there’s an error
during transmission. If the report indicates NG, send the document again. If the
report indicates you should check the readability of certain pages, resend those pages.
When the feature is ON, the report is printed with every fax you send.
W Press [Functionl. rn.iT]. (71.
2* Press (T) or [0 to select ON or OFF.
S Press®,
m Press W to exit.