Brother MFC7000FC - Manual (Page 44)

I® Enter the fax number, and press
S If you’ve set Call Reservation to ON, pick up your handset if the MFC rings.
You cannot use auto redial with Call Reservation. You cannot use Call
Reservation with Delayed Transmission or with Polling. You must register your
Station ID number to set Call Back Message to ON.
Print Call Back Message_____________________
W Press [Funciionl. m. (D. in.
2 Press (^.
Multiple Resolution Tyansmlssion__________
Use this feature to select separate resolution settings for each page of the fax
you're sending. This could be useful if you're sending a fax with photos and
letters, or some pages with small print and others with normal print. Resolution
settings return to STANDARD after the fax is sent,
ij' Insert documents in feeder, then press IFunctionl. [T], [T], (T).
2 Use 13 or 0 to select resolution for page 1, then press
3 Repeat Step 2 for subsequent pages. Press Q when you’re finished.
H Enter the fax number you're calling, and press [^.
Receiving Faxes
See
F/T Ring
Time
in the Setup
Manual
p. 22
Operation from Extension Telephone
If you answer a fax call on an extension phone, you can make your MFC take
over by using the Activation Code. When you press the Activation Code
® S CD. the MFC starts to receive a fax.
If the MFC answers a voice call and double-rings for you to take over, use the
Deactivation Code [§) [3 D] to take the call at an extension phone.
If you answer a call, and no one is on the line, assume you’re receiving a fax.
At the MFC phone, press then hang up. At an extension phone, press
@ d] [D. wait for fax receiving tones (chirps), then hang up. (Your caller will
have to press to send the fax.)