Sharp AQUOS LC-37GP1U - Manual (Page 34)

Using external equipment
Displaying an image from HDMI
equipment
Press MENU to exit.
j To v/atcl I an HDMI equipment imagti. select
' INPUT4, INPUT 5 or INPUT G from INPUT
SOURCE” menu using INPUT on the remote
control unit or on the TV.
4
5
Press MENU to display the MENU screen, and
then press ■</►• to select “Option".
2 -’ress ^/T to select “HDMI Setup”, and then
nmco ENTER
up
; A/T to select the desired item, and
press
ENTER.
; to select the desired setting, and
press
ENTER.
• Refer to your external equipment operation manual for the
signal type.
• “Audio Select” is only available for INPUT 6 .
• When connecting an HDMI-DVi conversion adapter/cable
to the HDMI terminal, the Image may not come In clearly.
input Skip
This .setting allows you tin skip' tlie HOMI-DVI lri[;ut on
the Input Selection operation.
j Press MENU to display the MENU screen, and
then press -4/^ to select “Setup”.
A Press Ai'T to select “Input Skip”, and then
^ press
ENTER.
A Press to select “Yes”, and then press
^ ENTER
Press MENU to exit.
HDMI
Setup
items
Selectiible _ .
Items Description
Auto View Enable
Disable Set whether or not to use
View Mode based on signal
recognition, including an HDMI
signal.
Audio
Select Digital
Analog
Select “Digital” for an audio
signal via the HDMI terminal.
Select “Analog" for an audio
signal via the R-AUDIO -L
terminal.
33