Kenwood TM-261A User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
0
®
® VOL control
Adjusts the level of receive audio from the speaker
{page 14}.
(D
MN button
Selects the Memory Name mode {page 30}.
CD POWER switch
Switches the transceiver ON or OFF {page 14}.
© SQL (Squelch) control
Adjusts the squelch threshold level {page 14}. This allows
you to mute speaker output while no stations are being
received.
® Microphone connector
Insert the 8-pin modular connector plug until the locking tab
“clicks”.
8 --- ----------------------------------------------------------------
UP-----------------------
DC 8 V, 200 mA max.
GND --------
STBY (PTT) ■
GND (MIC) ■
MIC ---------
RD : Open squelch audio (100 mV/10 ki2)
OWN----------------------------------------------
® MHz button
Selects the MHz mode. This mode allows you to use the
Tuning
control or the microphone
[UP]/[DWN]
buttons to
change the transceiver frequency in 1 MHz steps.
Also provides:
• AM/FM mode select (some TM-261A versions only)
{page 48}.
® F (Function) button
Allows you to select the different functions that are
available on multifunction buttons.
© TONE button
Switches the Tone function ON or OFF {page 22}. When
the optional TSU-8 is installed, also switches the CTCSS
function ON or OFF. Also provides:
• Automatic Tone frequency ID activate/deactivate {page 36}.
® REV (Reverse) button
Switches the transmit frequency and receive frequency
when operating with a transmit offset or a split memory
channel {page 23}.