Click the 1 save ii button, Click the 1, Ii button – Toshiba IK-WB11A User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/671256/45/background.png)
J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J
Enter the IP address, subnet mask, and default
gateway
Important
• If you do not know the subnet mask, consult the provider or relevant network
system administration support center.
• You do not need to enter the default gateway if the network camera will not
be accessed from another network. If you do need to enter a default gateway,
consult your network system administration support center.
J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J j
Click the 1
save
II button
The settings are registered.
^NOTE
• Clicking the I reset
11
button instead of clicking 1
11 button at Step 7
restores the previous configuration.
• The network camera has a feature (useful for multi view) to automatically
detects and remember other cameras on the same network. If there are
other cameras on the same network, it is recommended to set "Auto
Identification of Other Cameras" to "ON" (^ page 75).
• For details on configuring multi view, refer to configuring "Multi-Screen Mode
Settings" (^page 49).
m
0
)
3"
(D
"1
(0
45