Toshiba IK-WB11A - Manual (Page 9)

0°o
About the AC adaptor
Be sure to use only the supplied AC adaptor. Using a different AC adaptor may
cause the camera to malfunction, heat up, or catch fire. Before using the AC
adaptor, carefully read and observe the IMPORTANT SAFETY INSTRUCTIONS
(^page 7) and the notes below.
• Do not allow the connectors on the AC adaptor to come into contact with any
other metal object as this may result in short circuit.
• To connect the AC adaptor, firmly insert the plug on the end of the cable into
the AC adaptor jack. Do not insert the plug into other jacks as this may cause a
malfunction.
• When removing the connection cable, disconnect the cable by holding its plug.
Do not disconnect the cable by pulling on the cable.
• Do not drop the AC adaptor or subject it to strong impact.
• Do not use the AC adaptor in hot and humid places.
• Do not use the supplied AC adaptor with devices other than this camera.
• Temperature increasing on the surface of the adaptor is normal. Before moving
the adaptor to another location, unplug it from the wall outlet, and wait until its
temperature decreases.
• Buzzing noises may come from inside. This does not indicate malfunction.
• Using the AC adaptor near a radio, TV, or cellphone may cause interference.
Use the adaptor at sufficient distances from these devices.
Specifications
AC adaptor (AC-WB10)
Power supply
Rated output
Operating temperature
Storage temperature
External dimensions 100 to 240 V AC, 0.5 A, 50/60 Hz
10 V DC, 1.5 A
0t to +40t
-20t to +65t
50 x 32 x 85 mm (W / H / L)
m 0 )
3
CO
(D
C
■D
n-
(D
-1
(0
Q