EVCO EVCSR818P9EF - Manual (Page 58)

EVCO S.p.A. Vcolor 818 | Installer manual ver. 1.1 | Code 144VC818E114
page 58 of 94
11 CONFIGURATION
11.1 Setting the real day and time
Operate as follows:
1. Make sure that the instrument is in the “on” status.
2. Make sure that the keyboard is not locked and that no procedure is in progress.
3. Press and release the HOME key (1) and then press and release the MENU key (2).
4. Press and release the SET key (3), press and release the + key (4) or the - key (5) to modify the value and
then press and release the SET key (6) again to confirm and select the next one.
Operate as follows to exit the procedure:
5. Press and release the ESCAPE key or do not operate for 60 s.