I.C.E. GIDM-325 User Manual
I.C.E. Equipment
GIDM
INDUSTRIAL / COMMERCIAL
PACKAGED FURNACES
INSTALLATION, OPERATION AND MAINTENANCE MANUAL
(Suitable for Operation with up to 100% Fresh Air)
READ MANUAL CAREFULY BEFORE INSTALLING
OR OPERATING THE FURNACE
FOR YOUR SAFETY
FOR YOUR SAFETY
If you smell gas follow these
instructions,
The use and storage of gasoline or other
flammable vapors and liquids in open
1) Open windows.
containers in the vicinity of this appliance
2) Do not touch electrical switches.
is hazardous.
3) Extinguish any open flame.
4) Call the gas supplier immediately.
MODEL:
SERIAL NUMBER:
JOB: DATE OF INSTALLATION:
WARNING
IMPROPER INSTALLATION, ADJUSTMENT, SERVICE OR MAINTENANCE CAN
CAUSE PROPERTY DAMAGE, INJURY OR DEATH. PLEASE READ THE
INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTION
THOROUGHLY.
*THIS UNIT IS TO BE SERVICED BY QUALIFIED PERSONNEL*
**DO NOT TAMPER WITH THE UNIT OR CONTROLS**
INSTALLER’S RESPONSIBILITY
Installer please note: This equipment has been test fired and inspected. It has been shipped free from defects from
our factory. However, during shipment and installation, problems such as loose wires, leaks or loose fasteners may
occur. It is the installer’s responsibility to inspect and correct any problems that may be found.
INSTALLER/SERVICE CONTRACTOR
NAME:
ADDRESS:
TELEPHONE:
CONTACT:
Document Outline
- Cover
- General Information
- General Operating Instructions
- Troubleshooting Guide
- Maintenance
- Bearing Installation and Maintenance
- Recommended Lubrication and Frequency
- Tensioning V-Belt Drives
- GIDM Warranty
- Economite Gas Burners
- GP Burner
- Figure I
- Figure II & III
- Figure IV
- Figure V
- Figure VI
- Figure VII
- Figure VIII
- GP Burner Specification