IC Realtime 1.3 Megapixel 18X PTZ Network Camera (ICIPMP1801S) User Manual
Page 26
26
• BACK: Go back to the previous menu.
• EXIT: Log out the system menu.
Menu Password
Move the cursor to the MENU PASSWORD and the click the confirm button to go to the fourth menu.
• PASSWORD: It is to set the speed dome menu password. Please use the left/right button to set.
• SETTING: Click the confirm button to go to the password setup interface. Please use the left/right
button to set the value and then click the confirm button to confirm current option. Move the cursor to
the SAVE button and then click the confirm button to save current setup. Click the BACK button to
go to the previous menu.
• BACK: Go back to the previous menu.
• EXIT: Log out the system menu.
If you have forgot your password. After three times of login failure, system may pop up an 8-digit
internal code. Please contact our technical engineer for help.
2.4.5 Alarm Setup
Move the cursor to highlight ALARM SETTING button and then click confirm button.
z
ALARM NO: Here is to set alarm input. Alarm input value ranges from 1 to 7. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
z
ACTION: Action on alarm function. It includes NONE/PRESET/AUTO SCAN/TOURING functions.
Please use the left/right button on the keyboard or in the speed dome terminal menu to set.
z
CONTACT
：You can set system activation operation once alarm occurred. There are two alarm signal
mode: normal open (N/O) and normal closed (N/C). Please use the left/right button on the keyboard or
in the speed dome terminal menu to set.
z
PRESET
NO.
：Please use the left/right button on the keyboard or in the speed dome terminal menu to
set. The camera will turn to the specified preset to monitor after alarm occurs.
z
AUTO
SCAN
：Please use the left/right button on the keyboard or in the speed dome terminal menu to
set. The camera will begin auto scan after alarm occurs.
PASSWORD ：
SETTING ：
BACK
EXIT
PASSWORD：
1
2 3 4 5
6
7 8 9 0
→ SAVE BACK
ALARM NO. : 01
ACTION : NONE
CONTACT : N/O
PRESET : 001
AUTO SCAN : 001
CRUISE : 001
RELAY OUT : OFF（OFF/1→5S/2→5S/1&2→
5S）
RESET DELAY : 3S
SAVE
BACK
EXIT