Intellijel Atlantis - Manual (Page 4)

In the mixer section you can adjust the balance of the primary oscillators waveforms including a sinewave which is normalled to the EXT IN jack. You could also
patch in one of the modulation oscillators waveforms into this channel and be able to operate the Atlantis as a proper two oscillator synth.
There is a switch labelled “
LINK ” which enables the modulation vco pitch to be based as an offset of the primary VCO. This is useful when using it as a stacked dual
vco or when you have the mod VCO acting as the linear FM source for the primary vco and wish to maintain the ratio.
Introduction - part 2
02