Envelope modulation – Intellijel Atlantis User Manual
Page 52
Advertising
The cutoff frequency is normalled to the ENVELOPE section generator. Set the amount of ENVELOPE modulation with the
ENV
slider, and choose the polarity
(positive or negative) with the
ENV POLARITY
switch. Note that you can engage the ENVELOPE generator by using a gate signal or with the CYCLE switch.
ENVELOPE modulation
VCF section - 14
ENVelope modulation amount
VCF out to VCA section
VCF out
adjust initial cutoff frequency
+ENVELOPE modulation
+8V
-8V
t
-ENVELOPE modulation
+8V
-8V
t
GATE signal
Advertising