Interlogix NS3550-2T-8S Installation Guide - Manual (Page 11)

IFS NS3552-8P-2S and NS3550-2T-8S Quick Installation Guide 7
5. Logon to the Console
Once the terminal has been connected to the device, power on the
Managed Industrial Switch and the terminal will display “running testing
procedures”. The following procedures show the NS3552-8P-2S but are
applicable to the NS3550-2T-8S as well.
Then, the following message asks the login user name and password. The
factory default user name and password as following and the login screen
in Figure 5-1 appears.
User name: admin
Password: admin
Figure 5-1 NS3552-8P-2S Console Login screen
#Note: 1. For security reasons, please change and
memorize the new password after this first setup.
2. Only accept commands in lowercase letters under
the console interface.