Interlogix NS3550-2T-8S Installation Guide - Manual (Page 13)

IFS NS3552-8P-2S and NS3550-2T-8S Quick Installation Guide 9
Figure 6-2 Set IP address screen
4. Repeat Step 1 to check if the IP address is changed.
If the IP is successfully configured, the Managed Industrial Switch will apply
the new IP address setting immediately. You can access the Web interface of
ISW Managed Industrial Switch through the new IP address.
If you a not familiar with console command or the
related parameter, enter “?” anytime in console to get
the help description.