Interlogix 2100 Series - Manual

3.44"
8.73 cm
2.50"
5.75 cm
1.25"
3.19 cm
0.75"
1.91 cm
1.63"
4.13 cm
2.13"
5.40 cm
0.56"
1.43 cm
0.69"
1.75 cm
2.56"
6.50 cm
0.44"
1.11 cm
Movable portion of unit to be protected
Movable portion of unit to be protected
Stationary
post
Ring or eye
bolt on wall
To alarm control
To alarm control
➜
➜
Mounting
Mount the magnet section on the object to be protected.
Once the magnet is installed, place the cover over the
magnet and screw it to the surface. Use #10 screws to
secure both units. Mount the cord section with clamps so
the cord will pull straight out of the magnet housing when
it reaches the end of the cord. Make sure it has the correct
slack and loop so it will not hang up on anything as the
protected object is moved.
Alternate mounting
Loop the cord through the object being protected or
through a stationary object.
CAUTION If the alternate mounting is used, make sure
the alarm owner is warned that they could
break the pull-apart if they do not release it
before moving the protected object.
Lead functions
Form A Model 2105-A, use black leads
Form C Model 2107-A
Lead color Function
Black Common
White Closed Loop (NO)
Red Open Loop (NC)
Magnet cover
Magnet
Switch
2100 Series
Magnapull Heavy Duty
Magnetic Contact with Pull-Apart Cords
Models: 2105-A, 2107-A
Installation Instructions