Interlogix 2500 Series - Manual

1030557C • August 2006
Copyright © 2006, GE Security Inc.
2500 Series Aluminum Housing
Installation Instructions
Introduction
This is the GE 2500 Series Aluminum Housing Installation
Instructions for models 2505A-L, 2507A-L, 2507AD, 2507AH.
Installation
To install models 2505A-L, 2507A-L, 2507AD do the following:
1.
Mount the switch and magnet so both labels read in the
same direction (Figure 1). Use the screws supplied or 18/8
stainless steel screws.
Note: Switch position and gap distances will be reduced
when switch and magnet are positioned incorrectly.
Figure 1. Line up the labels
To install model 2507AH, do the following:
1.
Mount switch in desired location.
2. Attach an ohmmeter to the black and white wires. The
meter should read infinity with the magnet away from the
switch.
3. Bring the magnet toward the switch until the meter reads
zero ohms. Mark this position.
4. Bring the magnet closer to the switch until the meter reads
infinity. Mark this position.
5. Position the magnet between the two marks.
6. Align the magnet and switch so the labels read in the same
direction. With the magnet positioned in this manner, the
switch will be harder to defeat with an external magnet.
Lead functions
Here are the lead colors and functions:
Specifications
Product ordering
GE
Security
GE
Security
2 in. (5.08 cm)
3 in. (7.62 cm)
0.5 in.
(1.27 cm)
1 i
n.
(2
.54 cm)
Mounting
holes
0.156 in.
(4 mm) dia. Magnet
included
(part no. 1920)
Lead color Function
Black Common
White Closed loop (NO)
Red Open loop (NC)
Form A (2505A)
Voltage: 100 V max.
Current: 0.5 A max.
Power: 7.5 W max.
Form C (2507A, 2507AH, 2507AD)
Voltage: 30 V max.
Current: 0.25 A max.
Power: 3.0 W max.
Form A (2505A) ULC specifications
Voltage: 30 V max.
Current: 50 mA max.
Form A (2505A) European Union specification
Voltage: 48 V max.
Current: 0.5 A max.
Model number Loop type Electrical configuration Finish Gap distance (make) Lead type Listing
2505A-L Closed NO Anodized Up to 3 in. 3 ft. stainless steel armored cable UL, ULC
2507A-L Open or closed SPDT Anodized Up to 3 in. 3 ft. stainless steel armored cable UL, ULC
2507AD-L Open or closed DPDT Anodized Up to 1.5 in. 3 ft. stainless steel armored cable UL
2507AH-L Open or closed SPDT Anodized 0.75 in. min, 2.5 in. max 3 ft. stainless steel armored cable UL
Technical support
Toll-free: 888.GESECURity (888.437.3287 in the US, including Alaska and Hawaii; Puerto Rico; Canada).
Outside the toll-free area: Contact your local dealer.
www.gesecurity.com