Interlogix Simon XT Rev D - Manual

P/N 466-2400 • REV D • 25FEB13 1
Simon XT Talking Touchscreen Installation
Sheet
Description
The Simon XT Talking Touch Screen (models 60-924-RF-TS
and 60-924-RF-TS-N without power supply) features a color
3.5 inch LCD screen with a graphical user interface designed
to control basic functionality of the Simon XT (v1.3 or later) and
Simon XTi control panels. Up to four touch screens can be
learned (programmed) into each Simon XT or XTi panel.
The touch screen provides a convenient option for the
following system operations:
• Arm the system (doors, windows, and motion sensors).
• Disarm the system.
• Activate a panic alarm to call the central monitoring station
in a nonmedical emergency.
• Check system status.
• Turn system controlled lights on or off (depending on your
system configuration).
• Lock and unlock system-controlled door locks (depending
on your system configuration).
• Hear voice feedback of the status of the Simon XT or XTi
control panel.
Installation
Use the following guidelines when adding this touch screen to
the Simon XT or XTi system:
• The touch screen should be the last sensor programmed
(learned) into the panel.
• Program (learn) the touch screen into the panel as a
sensor.
• Program touch screens using sensor groups 00, 01, 04,
05, 06, or 07.
• The touch screen will work best if mounted greater than 3
ft. (approximately 1 m) from the Simon XT panel.
• Avoid mounting the touch screen directly behind the
Simon XT or XTi panel on the opposite side of the wall.
• Always do a sensor test before attaching the touch screen
to the wall.
• Do not wrap the antenna into the backplate. Follow the
instructions to install the antenna into the wall.
Sensor naming
Please use the following as a guide when naming sensors:
• Sensor names must have the word “window” or “door”
from the text library to interact with the touch screen Doors
and Windows icons on the Main screen.
• The Motion icon is controlled by sensors that are
programmed into the following groups: 15, 17, 18, 20, 28,
32.
• The Property icon is controlled by the following sensors:
• All sensors learned into Group 43.
• Sensors that are not named “window” or “door”.
• Sensors not learned into the Motion groups.
• Sensors that are named keyfob or keychain.
To program (learn) the touch screen into the Simon XT
panel:
1. Press the down arrow button on the panel and scroll to
System Programming.
2. Press OK.
The panel displays Enter Code .
3. Enter the installer access code and press OK.
4. Scroll to Sensors and press OK.
5. When the panel displays Learn Sensor, press OK.
The panel blinks Trip Sensor nn (where nn is the
next available zone number). You can enter a different
zone number if desired.
6. On the touch screen:
A. Press the Settings button.
B. Press the Down arrow until the Clear and Enroll
button appears.