One-touch, Recording – Philips CCZ194AT User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/680364/33/background.png)
One-Touch
Recording
33
The One-Touch Recording (OTR) function allows you to program
an immediate timed recording from 30 minutes to eight hours long
without setting the timer.
Before you begin, make sure:
• Channels are set up.
• There is a tape in theTVA/CR.The record tab must be intact.
I
Press the COMBI button, then use the CH(annel).
Up/Down buttons or the Number buttons to select the
channel you want to record.
2
Press the SPEED button until the desired recording speed
(SP.LP, or SLP) appears on-screen.
Details are on page 32.
3
Press the REC(ord)/OTR button repeatedly until the
desired recording length appears in the upper right cor
ner of the screen.
Recording will begin immediately.The
REC(ord) light will appear.
'OTR
CHI2
LENGTH 0:30
LENGTH : PRESS OTR
CANCEL : PRESS CLEAR
4
Press the STOP/EJECT button
on the TV/VCR to stop the
OTR.
I
4
To stop an OTR before recording is finished, press the
STOP/EJECT button on the TV/VCR.
Or, press the REC(ord)/OTR button, then press the
CLEAR button, then press the STOP/T button on the
remote control.
Helpful H ints
To check the time remaining for an
OTR after the OTR has been set,
press the STATUS/EXIT button.
To change the recording length while
an OTR is in progress, press the
REC(ord)/OTR button until the
desired recording length appears on
screen.
You can not pause an OTR.
To cancel an OTR but continue
recording, press the REC(ord)/OTR
button, then press the CLEAR but
ton.
You cannot record if DEFEAT
RECORDING is set to ON. Details
are on page 43.
You can change the tape speed with
the SPEED button while a recording
is in progress, but some distortion
may appear on the tape.