Timer recording 35 – Philips CCZ194AT User Manual

Page 35

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Follow the steps below to program theTVA/CR to record TV pro­

grams while you’re away from home. The TVA/CR will turn itself

on, record, and turn itself off automatically. Before you begin, make

sure:

• The clock is set. If not, CLOCK MUST BE SET appears.

« Channels are set up.

• There is a tape in the TV/VCR. (Make sure the tape’s record tab

is intact and the tape is long enough to record the program.)

Complete each step within 60 seconds of completing the
previous step. If you don’t, you may start again at step I.

I

Press the COMBI button, then press the MENU button.

> PRIM. SETUP

1 PRESS {

VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS

J

y

2

Press the PLAY/A button or the STOP/T button to select

VCR PROGRAM, then press the RFWD/^ button.

VCR PROGRAM

> ONCE

DAILY{MON-FRI)
WEEKLY
PROGRAM REVIEW

SELECT

A T

CHOOSE ►

TO END PRESS EXIT y

Timer Recording 35

.......... 2-3

3

Press the PLAY/A button or the STOP/T button to select

a ONCE, DAILY, OR WEEKLY recording.Then, press the

F.FWD/^ button.

• ONCE:

The TV/VCR will record a TV program on any day you

choose, up to 12 months away.

• DAILY:

The TV/VCR will record every day from Monday to

Friday - starting at the same time and recording the same channel

for the same length of time.

• WEEKLY:

The TV/VCR will record the same channel on the

same day, at the same time, and for the same length of time

every week.

Daily

Recording

(example)

'DAILY PROGRAM (MON-FRI)

PROGRAM -12 3 45 6 7 8-

SELECT PROGRAM NUMBER

TO END PRESS EXIT

Helpful H ints

If the power fails, programmed

timer recordings will be restored

when the clock is reset (The clock

will reset itself automatically if you

are using the AUTO CLOCK feature.

Details are on pages 1 4 - 1 7 . If

you are not using the AUTO CLOCK

feature, reset die clock manually.

Details are on pages 12 - 13.) The

timer recording will not occur only if

the timer recording was scheduled

to take place during the power fail­

ure.

You cannot set a timer recording if

DEFEAT RECORDING is set to ON.

Details are on page 43.______________________

Advertising
This manual is related to the following products: