Lippert Components LCI Electronic/Hydraulic Leveling & Slideout - Manual (Page 19)

Rev: 07.14.2014
Page 19
Untitled-1
Fig. 22 Fig. 23
Fig. 21
Run drill in reverse or counterclockwise to
retract.
Plastic Cap (A)
5. Insert driver into coupler found under plastic cap (Fig. 22).
6. Run drill in reverse or counterclockwise to retract jacks (Fig. 23).
7. Replace connector to the directional valve.
8. Close the manual override on the valves that were manually opened (Fig. 20).
A
Directional Valve
Connector