MF Digital SCRIBE EC_PC_manual - Manual (Page 20)

CD-3706/P Operator’s
Guide
Document Revision: 030501.1
Scribe EC Standalone Series
Operator’s Guide
Document Revision: 011804
Page 20
3. Place the printer / plate onto
the drive bay (fig. 3).
4. Use the dotted line at the rear of
the drive bay to guide the
positioning of the printer on the
drive tower
5. After placing the printer on the
drive tower, use the “Printer
Alignment” function to align the
printer. Please refer to p. 30 for
details.
6. Once you are satisfied with the
printer alignment, tighten the
thumb-screws located on both
sides of the printer (fig. 4).
(fig. 3)
(fig. 4)